919-343-5647Contact

Exhibit Formats

10x10 Trade Show Booths

A 10x10 booth is roughly 100 square feet of inline space, and in Raleigh it gets planned around the aisle, the back wall height, and the freight that fits one pallet.

10x10 Trade Show Booths priorities

Most first shows in Raleigh start at 10x10. The footprint is small, so the plan has to be sharp: one accountable lead names the building, the move-in window, and the single freight piece before any graphics get drawn.

  1. Back wall height for a 10x10 set to the show's rigging and line-of-sight rules, not a generic 8-foot default.
  2. Freight for a 10x10 consolidated to one crate or case so the inbound dock charge stays small.
  3. Graphics for a 10x10 built to read in three seconds from a moving aisle.
  4. Reuse for a 10x10 planned so the same hardware travels to the fairgrounds expo halls and back.

What a 10x10 booth actually is in Raleigh

A 10x10 is a single inline space, about 100 square feet, with neighbors on the left and right and an aisle in front. Everything has to work from that one open face.

The Raleigh Convention Center markets a 150,000-square-foot exhibit hall, and inline 10x10 spaces fill the grid between the islands. Your booth has to earn a glance before an attendee reaches the bigger builds, so the message goes high and stays simple.

Smaller fairgrounds and expo shows at the Agri Supply Exposition Center run the same inline logic on a 50,000-square-foot floor, where a clean 10x10 reads better than a crowded one.

Hardware that fits a 100-square-foot footprint

A 10x10 usually pairs a fabric back wall with a counter, a couple of banner stands, and one or two lights. Anything heavier eats the floor an attendee needs to stand on.

We pick hardware that breaks down into one freight piece. A pop-up or a tension-fabric wall that nests with the counter keeps the inbound material handling to a single line on the invoice.

Move-in and graphics for a 10x10

Install on a 10x10 is fast, but it still runs to a sequence: wall first, counter second, graphics and lighting last. Two people and an hour is the target when the kit is dry-fit beforehand.

Graphics are designed for swap. The headline panel changes show to show while the frame stays the same, so a North Hills hotel ballroom event and a downtown expo can share one set of hardware.

When to grow past a 10x10

A 10x10 stops working when the staff outnumbers the floor or the demo needs a private corner. That is the signal to look at a 10x20 inline or a corner space.

We keep the upgrade path open by choosing a 10x10 system that extends. The same wall and counter line can stretch into a 10x20 without a fresh build, which protects the first investment.

Frequently asked questions

How big is a 10x10 trade show booth?

A 10x10 is about 100 square feet of inline space, with one open face to the aisle and neighbors on both sides. The usable area shrinks once a counter and staff are in it, so the layout stays lean.

Is a 10x10 enough for a Raleigh Convention Center show?

For most exhibitors, yes. Inline 10x10 spaces fill the grid around the islands in the 150,000-square-foot exhibit hall, and a clean, tall-message 10x10 competes well from the aisle.

How does a 10x10 booth ship?

A well-planned 10x10 ships in a single crate or molded case sized to one pallet. That keeps inbound material handling to one charge and makes the carrier quote predictable.

Can a 10x10 grow into a larger booth later?

Yes, if it is bought that way. We specify wall and counter systems that extend into a 10x20 so the first show's hardware carries forward instead of being scrapped.